**Essay**

**73 (18120 words)**

**412**

STATISTICS HIGHER SECONDARY – FIRST YEAR Untouchability is a sin Untouchability is a crime Untouchability is inhuman TAMILNADU TEXTBOOK CORPORATION College Road , Chennai- 600 006 i ©Government of Tamilnadu First Edition – 2004 Reprinit – 2005 Chairperson Dr. J. Jothikumar Reader in Statistics Presidency College Chennai – 600 005. Thiru K. Nagabushanam S. G. Lecturer in Statistics Presidency College Chennai – 600 005. Reviewers Thiru R. Ravanan S. G. Lecturer in Statistics Presidency College Chennai – 600 005. Authors Tmt. V. Varalakshmi S. G. Lecturer in Statistics S. D.

N. B. Vaishnav College for women Chrompet, Chennai – 600 044.

Tmt. N. Suseela P. G. Teacher Anna Adarsh Matric Hr. Sec. School Annanagar, Chennai–600 040. Thiru G. Gnana Sundaram P. G. Teacher S. S. V. Hr. Sec. School Parktown, Chennai – 600 003. Tmt. S. Ezhilarasi P. G. Teacher P. K. G. G. Hr. Sec. School Ambattur, Chennai–600 053. Tmt. B. Indrani P. G. Teacher P. K. G. G. Hr. Sec. School Ambattur, Chennai – 600 053. Price: Rs. This book has been prepared by the Directorate of School Education on behalf of the Government of Tamilnadu. This book has been printed on 60 G.

S.

M paper Printed by offset at: ii CONTENTS Page 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Definitions, Scope and Limitations Introduction to sampling methods Collection of data, Classification and Tabulation Frequency distribution Diagramatic and graphical representation Measures of Central Tendency Measures of Dispersion, Skewness and Kurtosis Correlation Regression Index numbers 1 11 28 49 68 94 141 191 218 241 iii 1. DEFINITIONS, SCOPE AND LIMITATIONS Introduction: In the modern world of computers and information technology, the importance of statistics is very well recogonised by all the disciplines.

Statistics has originated as a science of statehood and found applications slowly and steadily in Agriculture, Economics, Commerce, Biology, Medicine, Industry, planning, education and so on. As on date there is no other human walk of life, where statistics cannot be applied. 1. 2 Origin and Growth of Statistics: The word ‘ Statistics’ and ‘ Statistical’ are all derived from the Latin word Status, means a political state. The theory of statistics as a distinct branch of scientific method is of comparatively recent growth.

Research particularly into the mathematical theory of statistics is rapidly proceeding and fresh discoveries are being made all over the world. 1. 3 Meaning of Statistics: Statistics is concerned with scientific methods for collecting, organising, summarising, presenting and analysing data as well as deriving valid conclusions and making reasonable decisions on the basis of this analysis. Statistics is concerned with the systematic collection of numerical data and its interpretation. The word ‘ statistic’ is used to refer to 1. Numerical facts, such as the number of people living in particular area. . The study of ways of collecting, analysing and interpreting the facts. 1. 4 Definitions: Statistics is defined differently by different authors over a period of time. In the olden days statistics was confined to only state affairs but in modern days it embraces almost every sphere of 1 1. 1 human activity. Therefore a number of old definitions, which was confined to narrow field of enquiry were replaced by more definitions, which are much more comprehensive and exhaustive. Secondly, statistics has been defined in two different ways – Statistical data and statistical methods.

The following are some of the definitions of statistics as numerical data. 1. Statistics are the classified facts representing the conditions of people in a state. In particular they are the facts, which can be stated in numbers or in tables of numbers or in any tabular or classified arrangement. 2. Statistics are measurements, enumerations or estimates of natural phenomenon usually systematically arranged, analysed and presented as to exhibit important interrelationships among them. 1. 4. 1 Definitions by A. L. Bowley: Statistics are numerical statement of facts in any department of enquiry placed in relation to each other. A. L. Bowley Statistics may be called the science of counting in one of the departments due to Bowley, obviously this is an incomplete definition as it takes into account only the aspect of collection and ignores other aspects such as analysis, presentation and interpretation. Bowley gives another definition for statistics, which states ‘ statistics may be rightly called the scheme of averages’ . This definition is also incomplete, as averages play an important role in understanding and comparing data and statistics provide more measures. 1. 4. Definition by Croxton and Cowden: Statistics may be defined as the science of collection, presentation analysis and interpretation of numerical data from the logical analysis. It is clear that the definition of statistics by Croxton and Cowden is the most scientific and realistic one. According to this definition there are four stages: 1. Collection of Data: It is the first step and this is the foundation upon which the entire data set. Careful planning is essential before collecting the data. There are different methods of collection of 2 data such as census, sampling, primary, secondary, etc. and the investigator should make use of correct method. 2. Presentation of data: The mass data collected should be presented in a suitable, concise form for further analysis. The collected data may be presented in the form of tabular or diagrammatic or graphic form. 3. Analysis of data: The data presented should be carefully analysed for making inference from the presented data such as measures of central tendencies, dispersion, correlation, regression etc. , 4. Interpretation of data: The final step is drawing conclusion from the data collected. A valid conclusion must be drawn on the basis of analysis.

A high degree of skill and experience is necessary for the interpretation. 1. 4. 3 Definition by Horace Secrist: Statistics may be defined as the aggregate of facts affected to a marked extent by multiplicity of causes, numerically expressed, enumerated or estimated according to a reasonable standard of accuracy, collected in a systematic manner, for a predetermined purpose and placed in relation to each other. The above definition seems to be the most comprehensive and exhaustive. 1. 5 Functions of Statistics: There are many functions of statistics. Let us consider the following five important functions. 1. 5. Condensation: Generally speaking by the word ‘ to condense’ , we mean to reduce or to lessen. Condensation is mainly applied at embracing the understanding of a huge mass of data by providing only few observations. If in a particular class in Chennai School, only marks in an examination are given, no purpose will be served. Instead if we are given the average mark in that particular examination, definitely it serves the better purpose. Similarly the range of marks is also another measure of the data. Thus, Statistical measures help to reduce the complexity of the data and consequently to understand any huge mass of data. 3 1. 5. Comparison: Classification and tabulation are the two methods that are used to condense the data. They help us to compare data collected from different sources. Grand totals, measures of central tendency measures of dispersion, graphs and diagrams, coefficient of correlation etc provide ample scope for comparison. If we have one group of data, we can compare within itself. If the rice production (in Tonnes) in Tanjore district is known, then we can compare one region with another region within the district. Or if the rice production (in Tonnes) of two different districts within Tamilnadu is known, then also a comparative study can be made.

As statistics is an aggregate of facts and figures, comparison is always possible and in fact comparison helps us to understand the data in a better way. 1. 5. 3 Forecasting: By the word forecasting, we mean to predict or to estimate before hand. Given the data of the last ten years connected to rainfall of a particular district in Tamilnadu, it is possible to predict or forecast the rainfall for the near future. In business also forecasting plays a dominant role in connection with production, sales, profits etc. The analysis of time series and regression analysis plays an important role in forecasting. . 5. 4 Estimation: One of the main objectives of statistics is drawn inference about a population from the analysis for the sample drawn from that population. The four major branches of statistical inference are Estimation theory Tests of Hypothesis Non Parametric tests Sequential analysis In estimation theory, we estimate the unknown value of the population parameter based on the sample observations. Suppose we are given a sample of heights of hundred students in a school, based upon the heights of these 100 students, it is possible to estimate the average height of all students in that school. . 5. 5 Tests of Hypothesis: 4 1. 2. 3. 4. A statistical hypothesis is some statement about the probability distribution, characterising a population on the basis of the information available from the sample observations. In the formulation and testing of hypothesis, statistical methods are extremely useful. Whether crop yield has increased because of the use of new fertilizer or whether the new medicine is effective in eliminating a particular disease are some examples of statements of hypothesis and these are tested by proper statistical tools. 1. Scope of Statistics: Statistics is not a mere device for collecting numerical data, but as a means of developing sound techniques for their handling, analysing and drawing valid inferences from them. Statistics is applied in every sphere of human activity – social as well as physical – like Biology, Commerce, Education, Planning, Business Management, Information Technology, etc. It is almost impossible to find a single department of human activity where statistics cannot be applied. We now discuss briefly the applications of statistics in other disciplines. 1. 6. Statistics and Industry: Statistics is widely used in many industries. In industries, control charts are widely used to maintain a certain quality level. In production engineering, to find whether the product is conforming to specifications or not, statistical tools, namely inspection plans, control charts, etc. , are of extreme importance. In inspection plans we have to resort to some kind of sampling – a very important aspect of Statistics. 1. 6. 2 Statistics and Commerce: Statistics are lifeblood of successful commerce. Any businessman cannot afford to either by under stocking or having overstock of his goods.

In the beginning he estimates the demand for his goods and then takes steps to adjust with his output or purchases. Thus statistics is indispensable in business and commerce. As so many multinational companies have invaded into our Indian economy, the size and volume of business is increasing. On one side the stiff competition is increasing whereas on the other side the tastes are changing and new fashions are emerging. In this 5 connection, market survey plays an important role to exhibit the present conditions and to forecast the likely changes in future. 1. . 3 Statistics and Agriculture: Analysis of variance (ANOVA) is one of the statistical tools developed by Professor R. A. Fisher, plays a prominent role in agriculture experiments. In tests of significance based on small samples, it can be shown that statistics is adequate to test the significant difference between two sample means. In analysis of variance, we are concerned with the testing of equality of several population means. For an example, five fertilizers are applied to five plots each of wheat and the yield of wheat on each of the plots are given.

In such a situation, we are interested in finding out whether the effect of these fertilisers on the yield is significantly different or not. In other words, whether the samples are drawn from the same normal population or not. The answer to this problem is provided by the technique of ANOVA and it is used to test the homogeneity of several population means. 1. 6. 4 Statistics and Economics: Statistical methods are useful in measuring numerical changes in complex groups and interpreting collective phenomenon. Nowadays the uses of statistics are abundantly made in any economic study.

Both in economic theory and practice, statistical methods play an important role. Alfred Marshall said, “ Statistics are the straw only which I like every other economist have to make the bricks”. It may also be noted that statistical data and techniques of statistical tools are immensely useful in solving many economic problems such as wages, prices, production, distribution of income and wealth and so on. Statistical tools like Index numbers, time series Analysis, Estimation theory, Testing Statistical Hypothesis are extensively used in economics. . 6. 5 Statistics and Education: Statistics is widely used in education. Research has become a common feature in all branches of activities. Statistics is necessary for the formulation of policies to start new course, consideration of facilities available for new courses etc. There are 6 many people engaged in research work to test the past knowledge and evolve new knowledge. These are possible only through statistics. 1. 6. 6 Statistics and Planning: Statistics is indispensable in planning.

In the modern world, which can be termed as the “world of planning”, almost all the organisations in the government are seeking the help of planning for efficient working, for the formulation of policy decisions and execution of the same. In order to achieve the above goals, the statistical data relating to production, consumption, demand, supply, prices, investments, income expenditure etc and various advanced statistical techniques for processing, analysing and interpreting such complex data are of importance. In India statistics play an important role in planning, commissioning both at the central and state government levels. . 6. 7 Statistics and Medicine: In Medical sciences, statistical tools are widely used. In order to test the efficiency of a new drug or medicine, t – test is used or to compare the efficiency of two drugs or two medicines, ttest for the two samples is used. More and more applications of statistics are at present used in clinical investigation. 1. 6. 8 Statistics and Modern applications: Recent developments in the fields of computer technology and information technology have enabled statistics to integrate their models and thus make statistics a part of decision making procedures of many organisations.

There are so many software packages available for solving design of experiments, forecasting simulation problems etc. SYSTAT, a software package offers mere scientific and technical graphing options than any other desktop statistics package. SYSTAT supports all types of scientific and technical research in various diversified fields as follows 1. Archeology: Evolution of skull dimensions 2. Epidemiology: Tuberculosis 3. Statistics: Theoretical distributions 4. Manufacturing: Quality improvement 7 5. Medical research: Clinical investigations. 6. Geology: Estimation of Uranium reserves from ground water 1. Limitations of statistics: Statistics with all its wide application in every sphere of human activity has its own limitations. Some of them are given below. 1. Statistics is not suitable to the study of qualitative phenomenon: Since statistics is basically a science and deals with a set of numerical data, it is applicable to the study of only these subjects of enquiry, which can be expressed in terms of quantitative measurements. As a matter of fact, qualitative phenomenon like honesty, poverty, beauty, intelligence etc, cannot be expressed numerically and any statistical analysis cannot be directly applied on these qualitative phenomenons.

Nevertheless, statistical techniques may be applied indirectly by first reducing the qualitative expressions to accurate quantitative terms. For example, the intelligence of a group of students can be studied on the basis of their marks in a particular examination. 2. Statistics does not study individuals: Statistics does not give any specific importance to the individual items, in fact it deals with an aggregate of objects. Individual items, when they are taken individually do not constitute any statistical data and do not serve any purpose for any statistical enquiry. 3.

Statistical laws are not exact: It is well known that mathematical and physical sciences are exact. But statistical laws are not exact and statistical laws are only approximations. Statistical conclusions are not universally true. They are true only on an average. 4. Statistics table may be misused: Statistics must be used only by experts; otherwise, statistical methods are the most dangerous tools on the hands of the inexpert. The use of statistical tools by the inexperienced and untraced persons might lead to wrong conclusions. Statistics can be easily misused by quoting wrong figures f data. As King says 8 5. aptly ‘ statistics are like clay of which one can make a God or Devil as one pleases’ . Statistics is only, one of the methods of studying a problem: Statistical method do not provide complete solution of the problems because problems are to be studied taking the background of the countries culture, philosophy or religion into consideration. Thus the statistical study should be supplemented by other evidences. Exercise – 1 I. Choose the best answer: 1. The origin of statistics can be traced to (a) State (b) Commerce (c) Economics (d) Industry. 2. Statistics may be called the science of counting’ is the definition given by (a) Croxton (b) A. L. Bowley (c) Boddington (d) Webster. Fill in the blanks: 3. In the olden days statistics was confined to only _______. 4. Classification and _______ are the two methods that are used to condense the data. 5. The analysis of time series and regression analysis plays an important role in _______. 6. ______ is one of the statistical tool plays prominent role in agricultural experiments. II. III. Answer the following questions: 7. Write the definitions of statistics by A. L. Bowley. 8.

What is the definitions of statistics as given by Croxton and Cowden. 9 9. Explain the four stages in statistics as defined by Croxton and Cowden. 10. Write the definition of statistics given by Horace Secrist. 11. Describe the functions of statistics. 12. Explain the scope of statistics. 13. What are the limitations of statistics. 14. Explain any two functions of statistics. 15. Explain any two applications of statistics. 16. Describe any two limitations of statistics. IV. Suggested Activities (Project Work): 17. Collect statistical informations from Magazines, News papers, Television, Internet etc. 18. Collect interesting statistical facts from various sources and paste it in your Album note book. Answers: I. 1. (a) 2. (b) II. 3. State affairs 4. Tabulation 5. Forecasting 6. Analysis of variance (or ANOVA) 10 2. INTRODUCTION TO SAMPLING METHODS Introduction: Sampling is very often used in our daily life. For example while purchasing food grains from a shop we usually examine a handful from the bag to assess the quality of the commodity. A doctor examines a few drops of blood as sample and draws conclusion about the blood constitution of the whole body.

Thus most of our investigations are based on samples. In this chapter, let us see the importance of sampling and the various methods of sample selections from the population. Population: In a statistical enquiry, all the items, which fall within the purview of enquiry, are known as Population or Universe. In other words, the population is a complete set of all possible observations of the type which is to be investigated. Total number of students studying in a school or college, total number of books in a library, total number of houses in a village or town are some examples of population.

Sometimes it is possible and practical to examine every person or item in the population we wish to describe. We call this a Complete enumeration, or census. We use sampling when it is not possible to measure every item in the population. Statisticians use the word population to refer not only to people but to all items that have been chosen for study. 2. 2. 1 Finite population and infinite population: A population is said to be finite if it consists of finite number of units. Number of workers in a factory, production of articles in a particular day for a company are examples of finite population.

The total number of units in a population is called population size. A population is said to be infinite if it has infinite number of units. For example the number of stars in the sky, the number of people seeing the Television programmes etc. , 11 2. 2 2. 1 2. 2. 2 Census Method: Information on population can be collected in two ways – census method and sample method. In census method every element of the population is included in the investigation. For example, if we study the average annual income of the families of a particular village or area, and if there are 1000 families in that area, we must study the income of all 1000 families.

In this method no family is left out, as each family is a unit. Population census of India: The population census of our country is taken at 10 yearly intervals. The latest census was taken in 2001. The first census was taken in 1871 – 72. [Latest population census of India is included at the end of the chapter. ] 2. 2. 3 Merits and limitations of Census method: Mertis: 1. The data are collected from each and every item of the population 2. The results are more accurate and reliable, because every item of the universe is required. 3. Intensive study is possible. 4. The data collected may be used for various surveys, analyses etc.

Limitations: 1. It requires a large number of enumerators and it is a costly method 2. It requires more money, labour, time energy etc. 3. It is not possible in some circumstances where the universe is infinite. 2. 3 Sampling: The theory of sampling has been developed recently but this is not new. In our everyday life we have been using sampling theory as we have discussed in introduction. In all those cases we believe that the samples give a correct idea about the population. Most of our decisions are based on the examination of a few items that is sample studies. 12 2. 3. Sample: Statisticians use the word sample to describe a portion chosen from the population. A finite subset of statistical individuals defined in a population is called a sample. The number of units in a sample is called the sample size. Sampling unit: The constituents of a population which are individuals to be sampled from the population and cannot be further subdivided for the purpose of the sampling at a time are called sampling units. For example, to know the average income per family, the head of the family is a sampling unit. To know the average yield of rice, each farm owner’ s yield of rice is a sampling unit.

Sampling frame: For adopting any sampling procedure it is essential to have a list identifying each sampling unit by a number. Such a list or map is called sampling frame. A list of voters, a list of house holders, a list of villages in a district, a list of farmers etc. are a few examples of sampling frame. 2. 3. 2 Reasons for selecting a sample: Sampling is inevitable in the following situations: 1. Complete enumerations are practically impossible when the population is infinite. 2. When the results are required in a short time. 3. When the area of survey is wide. . When resources for survey are limited particularly in respect of money and trained persons. 5. When the item or unit is destroyed under investigation. 2. 3. 3 Parameters and statistics: We can describe samples and populations by using measures such as the mean, median, mode and standard deviation. When these terms describe the characteristics of a population, they are called parameters. When they describe the characteristics of a sample, they are called statistics. A parameter is a characteristic of a population and a statistic is a characteristic of a sample.

Since samples are subsets of population statistics provide estimates of the 13 parameters. That is, when the parameters are unknown, they are estimated from the values of the statistics. In general, we use Greek or capital letters for population parameters and lower case Roman letters to denote sample statistics. [N, µ, ? , are the standard symbols for the size, mean, S. D, of population. n , x , s, are the standard symbol for the size, mean, s. d of sample respectively]. 2. 3. 4 Principles of Sampling: Samples have to provide good estimates. The following principle tell us that the sample methods provide such good estimates 1.

Principle of statistical regularity: A moderately large number of units chosen at random from a large group are almost sure on the average to possess the characteristics of the large group. 2. Principle of Inertia of large numbers: Other things being equal, as the sample size increases, the results tend to be more accurate and reliable. 3. Principle of Validity: This states that the sampling methods provide valid estimates about the population units (parameters). 4. Principle of Optimisation: This principle takes into account the desirability of obtaining a sampling design which gives optimum results.

This minimizes the risk or loss of the sampling design. The foremost purpose of sampling is to gather maximum information about the population under consideration at minimum cost, time and human power. This is best achieved when the sample contains all the properties of the population. Sampling errors and non-sampling errors: The two types of errors in a sample survey are sampling errors and non – sampling errors. 1. Sampling errors: Although a sample is a part of population, it cannot be expected generally to supply full information about population. So there may be in most cases difference between statistics and 14 arameters. The discrepancy between a parameter and its estimate due to sampling process is known as sampling error. 2. Non-sampling errors: In all surveys some errors may occur during collection of actual information. These errors are called Non-sampling errors. 2. 3. 5 Advantages and Limitation of Sampling: There are many advantages of sampling methods over census method. They are as follows: 1. Sampling saves time and labour. 2. It results in reduction of cost in terms of money and manhour. 3. Sampling ends up with greater accuracy of results. 4. It has greater scope. 5. It has greater adaptability. . If the population is too large, or hypothetical or destroyable sampling is the only method to be used. The limitations of sampling are given below: 1. Sampling is to be done by qualified and experienced persons. Otherwise, the information will be unbelievable. 2. Sample method may give the extreme values sometimes instead of the mixed values. 3. There is the possibility of sampling errors. Census survey is free from sampling error. 2. 4 Types of Sampling: The technique of selecting a sample is of fundamental importance in sampling theory and it depends upon the nature of investigation.

The sampling procedures which are commonly used may be classified as 1. Probability sampling. 2. Non-probability sampling. 3. Mixed sampling. 2. 4. 1 Probability sampling (Random sampling): A probability sample is one where the selection of units from the population is made according to known probabilities. (eg. ) Simple random sample, probability proportional to sample size etc. 15 2. 4. 2 Non-Probability sampling: It is the one where discretion is used to select ‘ representative’ units from the population (or) to infer that a sample is ‘ representative’ of the population. This method is called judgement or purposive sampling.

This method is mainly used for opinion surveys; A common type of judgement sample used in surveys is quota sample. This method is not used in general because of prejudice and bias of the enumerator. However if the enumerator is experienced and expert, this method may yield valuable results. For example, in the market research survey of the performance of their new car, the sample was all new car purchasers. 2. 4. 3 Mixed Sampling: Here samples are selected partly according to some probability and partly according to a fixed sampling rule; they are termed as mixed samples and the technique of selecting such samples is known as mixed sampling. . 5 Methods of selection of samples: Here we shall consider the following three methods: 1. Simple random sampling. 2. Stratified random sampling. 3. Systematic random sampling. 1. Simple random sampling: A simple random sample from finite population is a sample selected such that each possible sample combination has equal probability of being chosen. It is also called unrestricted random sampling. 2. Simple random sampling without replacement: In this method the population elements can enter the sample only once (ie) the units once selected is not returned to the population before the next draw. 3.

Simple random sampling with replacement: In this method the population units may enter the sample more than once. Simple random sampling may be with or without replacement. 16 2. 5. 1 Methods of selection of a simple random sampling: The following are some methods of selection of a simple random sampling. a) Lottery Method: This is the most popular and simplest method. In this method all the items of the population are numbered on separate slips of paper of same size, shape and colour. They are folded and mixed up in a container. The required numbers of slips are selected at random for the desire sample size.

For example, if we want to select 5 students, out of 50 students, then we must write their names or their roll numbers of all the 50 students on slips and mix them. Then we make a random selection of 5 students. This method is mostly used in lottery draws. If the universe is infinite this method is inapplicable. b) Table of Random numbers: As the lottery method cannot be used, when the population is infinite, the alternative method is that of using the table of random numbers. There are several standard tables of random numbers. 1. Tippett’ s table 2. Fisher and Yates’ table 3. Kendall and Smith’ s table are the three tables among them.

A random number table is so constructed that all digits 0 to 9 appear independent of each other with equal frequency. If we have to select a sample from population of size N= 100, then the numbers can be combined three by three to give the numbers from 001 to 100. [See Appendix for the random number table] Procedure to select a sample using random number table: Units of the population from which a sample is required are assigned with equal number of digits. When the size of the population is less than thousand, three digit number 000,001,002, … 999 are assigned. We may start at any place and may go on in .. ny direction such as column wise or row- wise in a random number table. But consecutive numbers are to be used. On the basis of the size of the population and the random number table available with us, we proceed according to our 17 convenience. If any random number is greater than the population size N, then N can be subtracted from the random number drawn. This can be repeatedly until the number is less than N or equal to N. Example 1: In an area there are 500 families. Using the following extract from a table of random numbers select a sample of 15 families to find out the standard of living of those families in that area. 652 9031 2030 0641 3819 7617 2327 1489 8431 1220 7353 0828 2150 4129 6007 0385 2352 7148 9410 8488 2472 1943 9179 0422 0043 4890 2722 7209 3488 1749 8445 4950 Solution: In the above random number table we can start from any row or column and read three digit numbers continuously row-wise or column wise. Now we start from the third row, the numbers are: 203 272 023 284 277 450 353 641 600 148 794 908 109 280 179 Since some numbers are greater than 500, we subtract 500 from those numbers and we rewrite the selected numbers as follows: 203 272 023 284 277 450 353 141 100 148 294 408 109 280 179 ) Random number selections using calculators or computers: Random number can be generated through scientific calculator or computers. For each press of the key get a new random numbers. The ways of selection of sample is similar to that of using random number table. 18 Merits of using random numbers: Merits: 1. Personal bias is eliminated as a selection depends solely on chance . 2. A random sample is in general a representative sample for a homogenous population. 3. There is no need for the thorough knowledge of the units of the population. 4.

The accuracy of a sample can be tested by examining another sample from the same universe when the universe is unknown. 5. This method is also used in other methods of sampling. Limitations: 1. Preparing lots or using random number tables is tedious when the population is large. 2. When there is large difference between the units of population, the simple random sampling may not be a representative sample. 3. The size of the sample required under this method is more than that required by stratified random sampling. 4. It is generally seen that the units of a simple random sample lie apart geographically.

The cost and time of collection of data are more. 2. 5. 2 Stratified Random Sampling: Of all the methods of sampling the procedure commonly used in surveys is stratified sampling. This technique is mainly used to reduce the population heterogeneity and to increase the efficiency of the estimates. Stratification means division into groups. In this method the population is divided into a number of subgroups or strata. The strata should be so formed that each stratum is homogeneous as far as possible. Then from each stratum a simple random sample may be selected and these are combined together to form the required sample from the population.

Types of Stratified Sampling: There are two types of stratified sampling. They are proportional and non-proportional. In the proportional sampling 19 equal and proportionate representation is given to subgroups or strata. If the number of items is large, the sample will have a higher size and vice versa. The population size is denoted by N and the sample size is denoted by ‘ n’ the sample size is allocated to each stratum in such a way that the sample fractions is a constant for each stratum. That is given by n/N = c. So in this method each stratum is represented according to its size.

In non-proportionate sample, equal representation is given to all the sub-strata regardless of their existence in the population. Example 2: A sample of 50 students is to be drawn from a population consisting of 500 students belonging to two institutions A and B. The number of students in the institution A is 200 and the institution B is 300. How will you draw the sample using proportional allocation? Solution: There are two strata in this case with sizes N1 = 200 and N2 = 300 and the total population N = N1 + N2 = 500 The sample size is 50. If n1 and n2 are the sample sizes, n1 = n2 = n 50 ? 00=20 ? N1 = N 500 n 50 ? 300=30 ? N2 = N 500 The sample sizes are 20 from A and 30 from B. Then the units from each institution are to be selected by simple random sampling. Merits and limitations of stratified sampling: Merits: 1. It is more representative. 2. It ensures greater accuracy. 20 3. It is easy to administer as the universe is sub – divided. 4. Greater geographical concentration reduces time and expenses. 5. When the original population is badly skewed, this method is appropriate. 6. For non – homogeneous population, it may field good results. Limitations: 1.

To divide the population into homogeneous strata, it requires more money, time and statistical experience which is a difficult one. 2. Improper stratification leads to bias, if the different strata overlap such a sample will not be a representative one. 2. 5. 3 Systematic Sampling: This method is widely employed because of its ease and convenience. A frequently used method of sampling when a complete list of the population is available is systematic sampling. It is also called Quasi-random sampling. Selection procedure: The whole sample selection is based on just a random start .

The first unit is selected with the help of random numbers and the rest get selected automatically according to some pre designed pattern is known as systematic sampling. With systematic random sampling every Kth element in the frame is selected for the sample, with the starting point among the first K elements determined at random. For example, if we want to select a sample of 50 students from 500 students under this method Kth item is picked up from the sampling frame and K is called the sampling interval. N Population size Sampling interval , K = = n Sample size 500 = 10 50 K = 10 is the sampling interval.

Systematic sample consists in selecting a random number say i K and every K th unit K = 21 subsequently. Suppose the random number ‘ i’ is 5, then we select 5, 15, 25, 35, 45,…… The random number ‘ i’ is called random …. start. The technique will generate K systematic samples with equal probability. Merits : 1. This method is simple and convenient. 2. Time and work is reduced much. 3. If proper care is taken result will be accurate. 4. It can be used in infinite population. Limitations: 1. Systematic sampling may not represent the whole population. 2.

There is a chance of personal bias of the investigators. Systematic sampling is preferably used when the information is to be collected from trees in a forest, house in blocks, entries in a register which are in a serial order etc. Exercise – 2 I. Choose the best Answer: 1. Sampling is inevitable in the situations (a) Blood test of a person (b) When the population is infinite (c) Testing of life of dry battery cells (d) All the above 2. The difference between sample estimate and population parameter is termed as (a) Human error (b) Sampling error (c) Non-sampling error (d) None of the above 3.

If each and every unit of population has equal chance of being included in the sample, it is known as (a) Restricted sampling (b) Purposive sampling (c) Simple random sampling (d) None of the above 4. Simple random sample can be drawn with the help of (a) Slip method (b) Random number table (c) Calculator (d) All the above 22 5. A selection procedure of a sample having no involvement of probability is known as (a) Purposive sampling (b) Judgement sampling (c) Subjective sampling (d) All the above 6. Five establishments are to be selected from a list of 50 establishments by systematic random sampling.

If the first number is 7, the next one is (a) 8 (b) 16 (c) 17 (d) 21 II. Fill in the blanks: 7. A population consisting of an unlimited number of units is called an ________ population 8. If all the units of a population are surveyed it is called ________ 9. The discrepancy between a parameter and its estimate due to sampling process is known as _______ 10. The list of all the items of a population is known as ______ 11. Stratified sampling is appropriate when population is _________ 12. When the items are perishable under investigation it is not possible to do _________ 13.

When the population consists of units arranged in a sequence would prefer ________ sampling 14. For a homogeneous population, ________ sampling is better than stratified random sampling. III. Answer the following questions: 15. Define a population 16. Define finite and infinite populations with examples 17. What is sampling? 18. Define the following terms (a) Sample (b) Sample size (c) census (d) Sampling unit (e) Sampling frame 19. Distinguish between census and sampling 20. What are the advantages of sampling over complete enumeration. 21. Why do we resort to sampling? 22.

What are the limitations of sampling? 23 23. State the principles of sampling 24. What are probability and non-probability sampling? 25. Define purposive sampling. Where it is used? 26. What is called mixed sampling? 27. Define a simple random sampling. 28. Explain the selection procedure of simple random Sampling. 29. Explain the two methods of selecting a simple random sampling. 30. What is a random number table? How will you select the random numbers? 31. What are the merits and limitations of simple random sampling? 32. What circumstances stratified random sampling is used? 33.

Discuss the procedure of stratified random sampling. Give examples. 34. What is the objective of stratification? 35. What are the merits and limitations of stratified random sampling? 36. Explain systematic sampling 37. Discuss the advantages and disadvantages of systematic random sampling 38. Give illustrations of situations where systematic sampling is used. 39. A population of size 800 is divided into 3 strata of sizes 300, 200, 300 respectively. A stratified sample size of 160 is to be drawn from the population. Determine the sizes of the samples from each stratum under proportional allocation. 0. Using the random number table, make a random number selection of 8 plots out of 80 plots in an area. 41. There are 50 houses in a street. Select a sample of10 houses for a particular study using systematic sampling. IV. Suggested activities: 42. (a) List any five sampling techniques used in your environment (b) List any five situations where we adopt census method. (i. e) complete enumeration). 24 43. Select a sample of students in your school (for a particular competition function) at primary, secondary higher secondary levels using stratified sampling using proportional allocation. 44.

Select a sample of 5 students from your class attendance register using method of systematic sampling. Answers: I. 1. (d) 2. (b) 3. (c) 4. (d) 5. (d) 6. (c) II. 7. infinite 8. complete enumeration or census 9. sampling error 10. sampling frame 11. heterogeneous or Non- homogeneous 12. complete enumeration 13. systematic 14. simple random POPULATION OF INDIA 2001 POPULATION OF INDIA 2001 India/State/ Union territories* INDIA 1,2 Andaman & Nicobar Is. * Andhra Pradesh Arunachal Pradesh Assam Bihar Chandigarh* PERSONS 1,027,015,247 356,265 75,727,541 1,091,117 26,638,407 82,878,796 900,914 MALES 31,277,078 192,985 38,286,811 573,951 13,787,799 43,153,964 508,224 Sex ratio Population (females Variation per FEMALES 1991-2001 thousand males) 495,738,169 163,280 37,440,730 517,166 12,850,608 39,724,832 392,690 21. 34 26. 94 13. 86 26. 21 18. 85 28. 43 40. 33 933 846 978 901 932 921 773 25 Chhatisgarh Dadra & Nagar Haveli* Daman & Diu* Delhi* Goa Gujarat 5 Haryana Himachal Pradesh 4 Jammu & Kashmir 2,3 Jharkhand Karnataka Kerala Lakshadweep* Madhya Pradesh Maharashtra Manipur Meghalaya Mizoram Nagaland Orissa Pondicherry* Punjab Rajasthan Sikkim Tamil Nadu Tripura Uttar Pradesh Uttaranchal West Bengal 0,795,956 220,451 158,059 13,782,976 1,343,998 50,596,992 21,082,989 6,077,248 10,069,917 26,909,428 52,733,958 31,838,619 60,595 60,385,118 96,752,247 2,388,634 2,306,069 891,058 1,988,636 36,706,920 973,829 24,289,296 56,473,122 540,493 62,110,839 3,191,168 166,052,859 8,479,562 80,221,171 10,452,426 121,731 92,478 7,570,890 685,617 26,344,053 11,327,658 3,085,256 5,300,574 13,861,277 26,856,343 15,468,664 31,118 31,456,873 50,334,270 1,207,338 1,167,840 459,783 1,041,686 18,612,340 486,705 12,963,362 29,381,657 288,217 31,268,654 1,636,138 87,466,301 4,316,401 41,487,694 0,343,530 98,720 65,581 6,212,086 658,381 24,252,939 9,755,331 2,991,992 4,769,343 13,048,151 25,877,615 16,369,955 29,477 28,928,245 46,417,977 1,181,296 1,138,229 431,275 946,950 18,094,580 487,124 11,325,934 27,091,465 252,276 30,842,185 1,555,030 78,586,558 4,163,161 38,733,477 18. 06 59. 20 55. 59 46. 31 14. 89 22. 48 28. 06 17. 53 29. 04 23. 19 17. 25 9. 42 17. 19 24. 34 22. 57 30. 02 29. 94 29. 18 64. 41 15. 94 20. 56 19. 76 28. 33 32. 98 11. 19 15. 74 25. 80 19. 20 17. 84 990 811 709 821 960 921 861 970 900 941 964 1,058 947 920 922 978 975 938 909 972 1,001 874 922 875 986 950 898 964 934 6 Notes: 1. The population of India includes the estimated population of entire Kachchh district, Morvi, Maliya-Miyana and Wankaner talukas of Rajkot district, Jodiya taluka of Jamanagar district of Gujarat State and entire Kinnaur district of Himachal Pradesh where population enumeration of Census of India 2001 could not be conducted due to natural calamity. 2. For working out density of India, the entire area and population of those portions of Jammu and Kashmir which are under illegal occupation of Pakistan and China have not been taken into account. 3.

Figures shown against Population in the age-group 0-6 and Literates do not include the figures of entire Kachchh district, Morvi, Maliya-Miyana and Wankaner talukas of Rajkot district, Jodiya taluka of Jamanagar district and entire Kinnaur district of Himachal Pradesh where population enumeration of Census of India 2001 could not be conducted due to natural calamity. 4. Figures shown against Himachal Pradesh have been arrived at after including the estimated figures of entire Kinnaur district of Himachal Pradesh where the population enumeration of Census of India 2001 could not be conducted due to natural calamity. . Figures shown against Gujarat have been arrived at after including the estimated figures of entire Kachchh district, Morvi, Maliya-Miyana and Wankaner talukas of Rajkot district, Jodiya taluka of Jamnagar district of Gujarat State where the population enumeration of Census of India 2001 could not be conducted due to natural calamity. 27 3. COLLECTION OF DATA, CLASSIFICATION AND TABULATION Introduction: Everybody collects, interprets and uses information, much of it in a numerical or statistical forms in day-to-day life.

It is a common practice that people receive large quantities of information everyday through conversations, televisions, computers, the radios, newspapers, posters, notices and instructions. It is just because there is so much information available that people need to be able to absorb, select and reject it. In everyday life, in business and industry, certain statistical information is necessary and it is independent to know where to find it how to collect it. As consequences, everybody has to compare prices and quality before making any decision about what goods to buy.

As employees of any firm, people want to compare their salaries and working conditions, promotion opportunities and so on. In time the firms on their part want to control costs and expand their profits. One of the main functions of statistics is to provide information which will help on making decisions. Statistics provides the type of information by providing a description of the present, a profile of the past and an estimate of the future. The following are some of the objectives of collecting statistical information. 1. To describe the methods of collecting primary statistical information. . To consider the status involved in carrying out a survey. 3. To analyse the process involved in observation and interpreting. 4. To define and describe sampling. 5. To analyse the basis of sampling. 6. To describe a variety of sampling methods. Statistical investigation is a comprehensive and requires systematic collection of data about some group of people or objects, describing and organizing the data, analyzing the data with 28 3. 1 the help of different statistical method, summarizing the analysis and using these results for making judgements, decisions and predictions.

The validity and accuracy of final judgement is most crucial and depends heavily on how well the data was collected in the first place. The quality of data will greatly affect the conditions and hence at most importance must be given to this process and every possible precautions should be taken to ensure accuracy while collecting the data. Nature of data: It may be noted that different types of data can be collected for different purposes. The data can be collected in connection with time or geographical location or in connection with time and location.

The following are the three types of data: 1. Time series data. 2. Spatial data 3. Spacio-temporal data. 3. 2. 1 Time series data: It is a collection of a set of numerical values, collected over a period of time. The data might have been collected either at regular intervals of time or irregular intervals of time. Example 1: The following is the data for the three types of expenditures in rupees for a family for the four years 2001,2002,2003,2004. Year 2001 2002 2003 2004 Food 3000 3500 4000 5000 Education 2000 3000 3500 5000 Others 3000 4000 5000 6000 Total 8000 10500 12500 16000 3. 3. 2. 2 Spatial Data: If the data collected is connected with that of a place, then it is termed as spatial data. For example, the data may be 29 1. Number of runs scored by a batsman in different test matches in a test series at different places 2. District wise rainfall in Tamilnadu 3. Prices of silver in four metropolitan cities Example 2: The population of the southern states of India in 1991. State Population Tamilnadu 5,56,38,318 Andhra Pradesh 6,63,04,854 Karnataka 4,48,17,398 Kerala 2,90,11,237 Pondicherry 7,89,416 3. . 3 Spacio Temporal Data: If the data collected is connected to the time as well as place then it is known as spacio temporal data. Example 3: Population State 1981 1991 Tamil Nadu 4,82,97,456 5,56,38,318 Andhra Pradesh 5,34,03,619 6,63,04,854 Karnataka 3,70,43,451 4,48,17,398 Kerala 2,54,03,217 2,90,11,237 Pondicherry 6,04,136 7,89,416 Categories of data: Any statistical data can be classified under two categories depending upon the sources utilized. These categories are, 1. Primary data 2. Secondary data 3. 3. Primary data: Primary data is the one, which is collected by the investigator himself for the purpose of a specific inquiry or study. Such data is original in character and is generated by survey conducted by individuals or research institution or any organisation. 30 3. 3 Example 4: If a researcher is interested to know the impact of noonmeal scheme for the school children, he has to undertake a survey and collect data on the opinion of parents and children by asking relevant questions. Such a data collected for the purpose is called primary data.

The primary data can be collected by the following five methods. 1. Direct personal interviews. 2. Indirect Oral interviews. 3. Information from correspondents. 4. Mailed questionnaire method. 5. Schedules sent through enumerators. 1. Direct personal interviews: The persons from whom informations are collected are known as informants. The investigator personally meets them and asks questions to gather the necessary informations. It is the suitable method for intensive rather than extensive field surveys. It suits best for intensive study of the limited field.

Merits: 1. People willingly supply informations because they are approached personally. Hence, more response noticed in this method than in any other method. 2. The collected informations are likely to be uniform and accurate. The investigator is there to clear the doubts of the informants. 3. Supplementary informations on informant’ s personal aspects can be noted. Informations on character and environment may help later to interpret some of the results. 4. Answers for questions about which the informant is likely to be sensitive can be gathered by this method. 5.

The wordings in one or more questions can be altered to suit any informant. Explanations may be given in other languages also. Inconvenience and misinterpretations are thereby avoided. 31 Limitations: 1. It is very costly and time consuming. 2. It is very difficult, when the number of persons to be interviewed is large and the persons are spread over a wide area. 3. Personal prejudice and bias are greater under this method. 2. Indirect Oral Interviews: Under this method the investigator contacts witnesses or neighbours or friends or some other third parties who are capable of supplying the necessary information.

This method is preferred if the required information is on addiction or cause of fire or theft or murder etc. , If a fire has broken out a certain place, the persons living in neighbourhood and witnesses are likely to give information on the cause of fire. In some cases, police interrogated third parties who are supposed to have knowledge of a theft or a murder and get some clues. Enquiry committees appointed by governments generally adopt this method and get people’ s views and all possible details of facts relating to the enquiry.

This method is suitable whenever direct sources do not exists or cannot be relied upon or would be unwilling to part with the information. The validity of the results depends upon a few factors, such as the nature of the person whose evidence is being recorded, the ability of the interviewer to draw out information from the third parties by means of appropriate questions and cross examinations, and the number of persons interviewed. For the success of this method one person or one group alone should not be relied upon. 3.

Information from correspondents: The investigator appoints local agents or correspondents in different places and compiles the information sent by them. Informations to Newspapers and some departments of Government come by this method. The advantage of this method is that it is cheap and appropriate for extensive investigations. But it may not ensure accurate results because the correspondents are likely to be negligent, prejudiced and biased. This method is adopted in those cases where informations are to be collected periodically from a wide area for a long time. 32 . Mailed questionnaire method: Under this method a list of questions is prepared and is sent to all the informants by post. The list of questions is technically called questionnaire. A covering letter accompanying the questionnaire explains the purpose of the investigation and the importance of correct informations and request the informants to fill in the blank spaces provided and to return the form within a specified time. This method is appropriate in those cases where the informants are literates and are spread over a wide area. Merits: 1. It is relatively cheap. . It is preferable when the informants are spread over the wide area. Limitations: 1. The greatest limitation is that the informants should be literates who are able to understand and reply the questions. 2. It is possible that some of the persons who receive the questionnaires do not return them. 3. It is difficult to verify the correctness of the informations furnished by the respondents. With the view of minimizing non-respondents and collecting correct information, the questionnaire should be carefully drafted. There is no hard and fast rule.

But the following general principles may be helpful in framing the questionnaire. A covering letter and a self addressed and stamped envelope should accompany the questionnaire. The covering letter should politely point out the purpose of the survey and privilege of the respondent who is one among the few associated with the investigation. It should assure that the informations would be kept confidential and would never be misused. It may promise a copy of the findings or free gifts or concessions etc. , Characteristics of a good questionnaire: 1. Number of questions should be minimum. . Questions should be in logical orders, moving from easy to more difficult questions. 33 3. Questions should be short and simple. Technical terms and vague expressions capable of different interpretations should be avoided. 4. Questions fetching YES or NO answers are preferable. There may be some multiple choice questions requiring lengthy answers are to be avoided. 5. Personal questions and questions which require memory power and calculations should also be avoided. 6. Question should enable cross check. Deliberate or unconscious mistakes can be detected to an extent. 7.

Questions should be carefully framed so as to cover the entire scope of the survey. 8. The wording of the questions should be proper without hurting the feelings or arousing resentment. 9. As far as possible confidential informations should not be sought. 10. Physical appearance should be attractive, sufficient space should be provided for answering each questions. 5. Schedules sent through Enumerators: Under this method enumerators or interviewers take the schedules, meet the informants and filling their replies. Often distinction is made between the schedule and a questionnaire.

A schedule is filled by the interviewers in a face-to-face situation with the informant. A questionnaire is filled by the informant which he receives and returns by post. It is suitable for extensive surveys. Merits: 1. It can be adopted even if the informants are illiterates. 2. Answers for questions of personal and pecuniary nature can be collected. 3. Non-response is minimum as enumerators go personally and contact the informants. 4. The informations collected are reliable. The enumerators can be properly trained for the same. 5. It is most popular methods.

Limitations: 1. It is the costliest method. 34 2. Extensive training is to be given to the enumerators for collecting correct and uniform informations. 3. Interviewing requires experience. Unskilled investigators are likely to fail in their work. Before the actual survey, a pilot survey is conducted. The questionnaire/Schedule is pre-tested in a pilot survey. A few among the people from whom actual information is needed are asked to reply. If they misunderstand a question or find it difficult to answer or do not like its wordings etc. , it is to be altered.

Further it is to be ensured that every questions fetches the desired answer. Merits and Demerits of primary data: 1. The collection of data by the method of personal survey is possible only if the area covered by the investigator is small. Collection of data by sending the enumerator is bound to be expensive. Care should be taken twice that the enumerator record correct information provided by the informants. 2. Collection of primary data by framing a schedules or distributing and collecting questionnaires by post is less expensive and can be completed in shorter time. . Suppose the questions are embarrassing or of complicated nature or the questions probe into personnel affairs of individuals, then the schedules may not be filled with accurate and correct information and hence this method is unsuitable. 4. The information collected for primary data is mere reliable than those collected from the secondary data. 3. 3. 2 Secondary Data: Secondary data are those data which have been already collected and analysed by some earlier agency for its own use; and later the same data are used by a different agency. According to W. A.

Neiswanger, ‘ A primary source is a publication in which the data are published by the same authority which gathered and analysed them. A secondary source is a publication, reporting the data which have been gathered by other authorities and for which others are responsible’ . 35 Sources of Secondary data: In most of the studies the investigator finds it impracticable to collect first-hand information on all related issues and as such he makes use of the data collected by others. There is a vast amount of published information from which statistical studies may be made and fresh statistics are constantly in a state of production.

The sources of secondary data can broadly be classified under two heads: 1. Published sources, and 2. Unpublished sources. 1. Published Sources: The various sources of published data are: 1. Reports and official publications of (i) International bodies such as the International Monetary Fund, International Finance Corporation and United Nations Organisation. (ii) Central and State Governments such as the Report of the Tandon Committee and Pay Commission. 2. Semi-official publication of various local bodies such as Municipal Corporations and District Boards. 3. Private publications-such as the publications of – (i)

Trade and professional bodies such as the Federation of Indian Chambers of Commerce and Institute of Chartered Accountants. (ii) Financial and economic journals such as ‘ Commerce’ , ‘ Capital’ and ‘ Indian Finance’ . (iii) Annual reports of joint stock companies. (iv) Publications brought out by research agencies, research scholars, etc. It should be noted that the publications mentioned above vary with regard to the periodically of publication. Some are published at regular intervals (yearly, monthly, weekly etc. ,) whereas others are ad hoc publications, i. e. , with no regularity about periodicity of publications.

Note: A lot of secondary data is available in the internet. We can access it at any time for the further studies. 36 2. Unpublished Sources All statistical material is not always published. There are various sources of unpublished data such as records maintained by various Government and private offices, studies made by research institutions, scholars, etc. Such sources can also be used where necessary Precautions in the use of Secondary data The following are some of the points that are to be considered in the use of secondary data 1. How the data has been collected and processed 2.

The accuracy of the data 3. How far the data has been summarized 4. How comparable the data is with other tabulations 5. How to interpret the data, especially when figures collected for one purpose is used for another Generally speaking, with secondary data, people have to compromise between what they want and what they are able to find. Merits and Demerits of Secondary Data: 1. Secondary data is cheap to obtain. Many government publications are relatively cheap and libraries stock quantities of secondary data produced by the government, by companies and other organisations. . Large quantities of secondary data can be got through internet. 3. Much of the secondary data available has been collected for many years and therefore it can be used to plot trends. 4. Secondary data is of value to: – The government – help in making decisions and planning future policy. – Business and industry – in areas such as marketing, and sales in order to appreciate the general economic and social conditions and to provide information on competitors. – Research organisations – by providing social, economical and industrial information. 37

Classification: The collected data, also known as raw data or ungrouped data are always in an un organised form and need to be organised and presented in meaningful and readily comprehensible form in order to facilitate further statistical analysis. It is, therefore, essential for an investigator to condense a mass of data into more and more comprehensible and assimilable form. The process of grouping into different classes or sub classes according to some characteristics is known as classification, tabulation is concerned with the systematic arrangement and presentation of classified data.

Thus classification is the first step in tabulation. For Example, letters in the post office are classified according to their destinations viz. , Delhi, Madurai, Bangalore, Mumbai etc. , Objects of Classification: The following are main objectives of classifying the data: 1. It condenses the mass of data in an easily assimilable form. 2. It eliminates unnecessary details. 3. It facilitates comparison and highlights the significant aspect of data. 4. It enables one to get a mental picture of the information and helps in drawing inferences. 5.

It helps in the statistical treatment of the information collected. Types of classification: Statistical data are classified in respect of their characteristics. Broadly there are four basic types of classification namely a) Chronological classification b) Geographical classification c) Qualitative classification d) Quantitative classification a) Chronological classification: In chronological classification the collected data are arranged according to the order of time expressed in years, months, weeks, etc. , The data is generally classified in ascending order of 38 . 4 time. For example, the data related with population, sales of a firm, imports and exports of a country are always subjected to chronological classification. Example 5: The estimates of birth rates in India during 1970 – 76 are Year 1970 1971 1972 1973 1974 1975 1976 Birth 36. 8 36. 9 36. 6 34. 6 34. 5 35. 2 34. 2 Rate b) Geographical classification: In this type of classification the data are classified according to geographical region or place. For instance, the production of paddy in different states in India, production of wheat in different countries etc. Example 6: Country America Yield of wheat in 1925 (kg/acre) China 893 Denmark France 225 439 India 862 c) Qualitative classification: In this type of classification data are classified on the basis of same attributes or quality like sex, literacy, religion, employment etc. , Such attributes cannot be measured along with a scale. For example, if the population to be classified in respect to one attribute, say sex, then we can classify them into two namely that of males and females. Similarly, they can also be classified into ‘ employed’ or ‘ unemployed’ on the basis of another attribute ‘ employment’ .

Thus when the classification is done with respect to one attribute, which is dichotomous in nature, two classes are formed, one possessing the attribute and the other not possessing the attribute. This type of classification is called simple or dichotomous classification. A simple classification may be shown as under 39 Population Male Female The classification, where two or more attributes are considered and several classes are formed, is called a manifold classification. For example, if we classify population simultaneously with respect to two attributes, e. sex and employment, then population are first classified with respect to ‘ sex’ into ‘ males’ and ‘ females’ . Each of these classes may then be further classified into ‘ employment’ and ‘ unemployment’ on the basis of attribute ‘ employment’ and as such Population are classified into four classes namely. (i) Male employed (ii) Male unemployed (iii) Female employed (iv) Female unemployed Still the classification may be further extended by considering other attributes like marital status etc. This can be explained by the following chart Population Male Female Employed Unemployed

Employed Unemployed d) Quantitative classification: Quantitative classification refers to the classification of data according to some characteristics that can be measured such as height, weight, etc. , For example the students of a college may be classified according to weight as given below. 40 Weight (in lbs) 90-100 100-110 110-120 120-130 130-140 140-150 Total No of Students 50 200 260 360 90 40 1000 In this type of classification there are two elements, namely (i) the variable (i. e) the weight in the above example, and (ii) the frequency in the number of students in each class.

There are 50 students having weights ranging from 90 to 100 lb, 200 students having weight ranging between 100 to 110 lb and so on. 3. 5 Tabulation: Tabulation is the process of summarizing classified or grouped data in the form of a table so that it is easily understood and an investigator is quickly able to locate the desired information. A table is a systematic arrangement of classified data in columns and rows. Thus, a statistical table makes it possible for the investigator to present a huge mass of data in a detailed and orderly form. It facilitates comparison and often reveals certain patterns in data which are otherwise not obvious.

Classification and ‘ Tabulation’ , as a matter of fact, are not two distinct processes. Actually they go together. Before tabulation data are classified and then displayed under different columns and rows of a table. Advantages of Tabulation: Statistical data arranged in a tabular form serve following objectives: 1. It simplifies complex data and the data presented are easily understood. 2. It facilitates comparison of related facts. 3. It facilitates computation of various statistical measures like averages, dispersion, correlation etc. 41 4.

It presents facts in minimum possible space and unnecessary repetitions and explanations are avoided. Moreover, the needed information can be easily located. 5. Tabulated data are good for references and they make it easier to present the information in the form of graphs and diagrams. Preparing a Table: The making of a compact table itself an art. This should contain all the information needed within the smallest possible space. What the purpose of tabulation is and how the tabulated information is to be used are the main points to be kept in mind while preparing for a statistical table.

An ideal table should consist of the following main parts: 1. Table number 2. Title of the table 3. Captions or column headings 4. Stubs or row designation 5. Body of the table 6. Footnotes 7. Sources of data Table Number: A table should be numbered for easy reference and identification. This number, if possible, should be written in the centre at the top of the table. Sometimes it is also written just before the title of the table. Title: A good table should have a clearly worded, brief but unambiguous title explaining the nature of data contained in the table. It should also state arrangement of data and the period covered.

The title should be placed centrally on the top of a table just below the table number (or just after table number in the same line). Captions or column Headings: Captions in a table stands for brief and self explanatory headings of vertical columns. Captions may involve headings and 42 sub-headings as well. The unit of data contained should also be given for each column. Usually, a relatively less important and shorter classification should be tabulated in the columns. Stubs or Row Designations: Stubs stands for brief and self explanatory headings of horizontal rows. Normally, a relatively more important classification is given in rows.

Also a variable with a large number of classes is usually represented in rows. For example, rows may stand for score of classes and columns for data related to sex of students. In the process, there will be many rows for scores classes but only two columns for male and female students. A model structure of a table is given below: Table Number Title of the Table Sub Heading Caption Headings Caption Sub-Headings Total Stub Sub- Headings Body Total Foot notes: Sources Note: 43 Body: The body of the table contains the numerical information of frequency of observations in the different cells.

This arrangement of data is according to the discription of captions and stubs. Footnotes: Footnotes are given at the foot of the table for explanation of any fact or information included in the table which needs some explanation. Thus, they are meant for explaining or providing further details about the data, that have not been covered in title, captions and stubs. Sources of data: Lastly one should also mention the source of information from which data are taken. This may preferably include the name of the author, volume, page and the year of publication.

This should also state whether the data contained in the table is of ‘ primary or secondary’ nature. Requirements of a Good Table: A good statistical table is not merely a careless grouping of columns and rows but should be such that it summarizes the total information in an easily accessible form in minimum possible space. Thus while preparing a table, one must have a clear idea of the information to be presented, the facts to be compared and he points to be stressed. Though, there is no hard and fast rule for forming a table yet a few general point should be kept in mind: 1.

A table should be formed in keeping with the objects of statistical enquiry. 2. A table should be carefully prepared so that it is easily understandable. 3. A table should be formed so as to suit the size of the paper. But such an adjustment should not be at the cost of legibility. 4. If the figures in the table are large, they should be suitably rounded or approximated. The method of approximation and units of measurements too should be specified. 44 5. Rows and columns in a table should be numbered and certain figures to be stressed may be put in ‘ box’ or ‘ circle’ or in bold letters. 6.

The arrangements of rows and columns should be in a logical and systematic order. This arrangement may be alphabetical, chronological or according to size. 7. The rows and columns are separated by single, double or thick lines to represent various classes and sub-classes used. The corresponding proportions or percentages should be given in adjoining rows and columns to enable comparison. A vertical expansion of the table is generally more convenient than the horizontal one. 8. The averages or totals of different rows should be given at the right of the table and that of columns at the bottom of the table.

Totals for every sub-class too should be mentioned. 9. In case it is not possible to accommodate all the information in a single table, it is better to have two or more related tables. Type of Tables: Tables can be classified according to their purpose, stage of enquiry, nature of data or number of characteristics used. On the basis of the number of characteristics, tables may be classified as follows: 1. Simple or one-way table 2. Two way table 3. Manifold table Simple or one-way Table: A simple or one-way table is the simplest table which contains data of one characteristic only.

A simple table is easy to construct and simple to follow. For example, the blank table given below may be used to show the number of adults in different occupations in a locality. The number of adults in different occupations in a locality Occupations No. Of Adults Total 45 Two-way Table: A table, which contains data on two characteristics, is called a twoway table. In such case, therefore, either stub or caption is divided into two co-ordinate parts. In the given table, as an example the caption may be further divided in respect of ‘ sex’ .

This subdivision is shown in two-way table, which now contains two characteristics namely, occupation and sex. The umber of adults in a locality in respect of occupation and sex No. of Adults Occupation Total Male Female Total Manifold Table: Thus, more and more complex tables can be formed by including other characteristics. For example, we may further classify the caption sub-headings in the above table in respect of “marital status”, “ religion” and “socio-economic status” etc. A table ,which has more than two characteristics of data is considered as a manifold table.

For instance , table shown below shows three characteristics namely, occupation, sex and marital status. Occupation M No. of Adults Male U Total M Female U Total Total Total Foot note: M Stands for Married and U stands for unmarried. 46 Manifold tables, though complex are good in practice as these enable full information to be incorporated and facilitate analysis of all related facts. Still, as a normal practice, not more than four characteristics should be represented in one table to avoid confusion. Other related tables may be formed to show the remaining characteristics Exercise – 3 I.

Choose the best answer: 1. When the collected data is grouped with reference to time, we have a) Quantitative classification b) Qualitative classification c) Geographical Classification d) Chorological Classification 2. Most quantitative classifications are a) Chronological b) Geographical c) Frequency Distribution d) None of these 3. Caption stands for a) A numerical information b) The column headings c) The row headings d) The table headings 4. A simple table contains data on a) Two characteristics b) Several characteristics c) One characteristic d) Three characteristics 5.

The headings of the rows given in the first column of a table are called a) Stubs b) Captions c) Titles d) Reference notes II. Fill in the blanks: 6. Geographical classification means, classification of data according to _______. 7. The data recorded according to standard of education like illiterate, primary, secondary, graduate, technical etc, will be known as _______ classification. 8. An arrangement of data into rows and columns is known as _______. 9. Tabulation follows ______. 10. In a manifold table we have data on _______. 47 III. Answer the following questions: 11. Define three types of data. 12. Define primary and secondary data. 3. What are the points that are to be considered in the use of secondary data? 14. What are the sources of secondary data? 15. Give the merits and demerits of primary data. 16. State the characteristics of a good questionnaire. 17. Define classification. 18. What are the main objects of classification? 19. Write a detail note on the types of classification. 20. Define tabulation. 21. Give the advantages of tabulation. 22. What are the main parts of an ideal table? Explain. 23. What are the essential characteristics of a good table? 24. Define one-way and two-way table. 25. Explain manifold table with example. IV.

Suggested Activities: 26. Collect a primary data about the mode of transport of your school students. Classify the data and tabulate it. 27. Collect the important and relevant tables from various sources and include these in your album note book. Answers: 1. (d) 2. (c) 3. (b) 6. Place 7. Qualitative 8. Tabulation 9. Classification 10. More than two characteristics 4. ( c) 5. (a) 48 4. FREQUENCY DISTRIBUTION 4. 1 Introduction: Frequency distribution is a series when a number of observations with similar or closely related values are put in separate bunches or groups, each group being in order of magnitude in a series.

It is simply a table in which the data are grouped into classes and the number of cases which fall in each class are recorded. It shows the frequency of occurrence of different values of a single Phenomenon. A frequency distribution is constructed for three main reasons: 1. To facilitate the analysis of data. 2. To estimate frequencies of the unknown population distribution from the distribution of sample data and 3. To facilitate the computation of various statistical measures 4. 2 Raw data: The statistical data collected are generally raw data or ungrouped data. Let us consider the daily wages (in Rs ) of 30 labourers in a factory. 0 70 55 50 60 65 40 30 80 90 75 45 35 65 70 80 82 55 65 80 60 55 38 65 75 85 90 65 45 75 The above figures are nothing but raw or ungrouped data and they are recorded as they occur without any pre consideration. This representation of data does not furnish any useful information and is rather confusing to mind. A better way to express the figures in an ascending or descending order of magnitude and is commonly known as array. But this does not reduce the bulk of the data. The above data when formed into an array is in the following form: 30 35 38 60 60 65 75 75 75 40 65 80 45 65 80 45 65 80 49 50 65 80 55 65 85 55 70 90 55 70 90

The array helps us to see at once the maximum and minimum values. It also gives a rough idea of the distribution of the items over the range . When we have a large number of items, the formation of an array is very difficult, tedious and cumbersome. The Condensation should be directed for better understanding and may be done in two ways, depending on the nature of the data. a) Discrete (or) Ungrouped frequency distribution: In this form of distribution, the frequency refers to discrete value. Here the data are presented in a way that exact measurement of units are clearly indicated.

There are definite difference between the variables of different groups of items. Each class is distinct and separate from the other class. Non-continuity from one class to another class exist. Data as such facts like the number of rooms in a house, the number of companies registered in a country, the number of children in a family, etc. The process of preparing this type of distribution is very simple. We have just to count the number of times a particular value is repeated, which is called the frequency of that class. In order to facilitate counting prepare a column of tallies.

In another column, place all possible values of variable from the lowest to the highest. Then put a bar (Vertical line) opposite the particular value to which it relates. To facilitate counting, blocks of five bars are prepared and some space is left in between each block. We finally count the number of bars and get frequency. Example 1: In a survey of 40 families in a village, the number of children per family was recorded and the following data obtained. 1 0 3 2 1 5 6 2 2 1 0 3 4 2 1 6 3 2 1 5 3 3 2 4 2 2 3 0 2 1 4 5 3 3 4 4 1 2 4 5 Represent the data in the form of a discrete frequency distribution. 50

Solution: Frequency distribution of the number of children Number of Children 0 1 2 3 4 5 6 Tally Marks Frequency 3 7 10 8 6 4 2 40 Total b) Continuous frequency distribution: In this form of distribution refers to groups of values. This becomes necessary in the case of some variables which can take any fractional value and in which case an exact measurement is not possible. Hence a discrete variable can be presented in the form of a continuous frequency distribution. Wage distribution of 100 employees Weekly wages (Rs) 50-100 100-150 150-200 200-250 250-300 300-350 350-400 Total Number of employees 4 12 22 33 16 8 5 100 51 . 3 Nature of class: The following are some basic technical terms when a continuous frequency distribution is formed or data are classified according to class intervals. a) Class limits: The class limits are the lowest and the highest values that can be included in the class. For example, take the class 30-40. The lowest value of the class is 30 and highest class is 40. The two boundaries of class are known as the lower limits and the upper limit of the class. The lower limit of a class is the value below which there can be no item in the class.

The upper limit of a class is the value above which there can be no item to that class. Of the class 60-79, 60 is the lower limit and 79 is the upper limit, i. e. in the case there can be no value which is less than 60 or more than 79. The way in which class limits are stated depends upon the nature of the data. In statistical calculations, lower class limit is denoted by L and upper class limit by U. b) Class Interval: The class interval may be defined as the size of grouping of data. For example, 50-75, 75-100, 100-125…are intervals. Each grouping begins with he lower limit of a interval and ends at the lower limit of the next succeeding interval each class class class c) Width or size of the class interval: The difference between the lower and upper class limits is called Width or size of class interval and is denoted by ‘ C’ . d) Range: The difference between largest and smallest value of the observation is called The Range and is denoted by ‘ R’ ie R = Largest value – Smallest value R = L-S e) Mid-value or mid-point: The central point of a class interval is called the mid value or mid-point. It is found out by adding the upper and lower limits of a class and dividing the sum by 2. 2 L+U 2 For example, if the class interval is 20-30 then the mid-value is 20 + 30 = 25 2 f) Frequency: Number of observations falling within a particular class interval is called frequency of that class. Let us consider the frequency distribution of weights if persons working in a company. (i. e. ) Midvalue = Weight Number of (in kgs) persons 30-40 25 40-50 53 50-60 77 60-70 95 70-80 80 80-90 60 90-100 30 Total 420 In the above example, the class frequency are 25,53,77,95,80,60,30. The total frequency is equal to 420. The total frequency indicate the total number of observations considered in a frequency distribution. ) Number of class intervals: The number of class interval in a frequency is matter of importance. The number of class interval should not be too many. For an ideal frequency distribution, the number of class intervals can vary from 5 to 15. To decide the number of class intervals for the frequency distributive in the whole data, we choose the lowest and the highest of the values. The difference between them will enable us to decide the class intervals. Thus the number of class intervals can be fixed arbitrarily keeping in view the nature of problem under study or it can be 53 ecided with the help of Sturges’ Rule. According to him, the number of classes can be determined by the formula K = 1 + 3. 322 log10 N Where N = Total number of observations log = logarithm of the number K = Number of class intervals. Thus if the number of observation is 10, then the number of class intervals is K = 1 + 3. 322 log 10 = 4. 322 ? 4 If 100 observations are being studied, the number of class interval is K = 1 + 3. 322 log 100 = 7. 644 ? 8 and so on. h) Size of the class interval: Since the size of the class interval is inversely proportional to the number of class interval in a given distribution.

The approximate value of the size (or width or magnitude) of the class interval ‘ C’ is obtained by using sturges rule as Range Size of class interval = C = Number of class interval Range = 1+3. 322 log10 N Where Range = Largest Value – smallest value in the distribution. 4. 4 Types of class intervals: There are three methods of classifying the data according to class intervals namely a) Exclusive method b) Inclusive method c) Open-end classes a) Exclusive method: When the class intervals are so fixed that the upper limit of one class is the lower limit of the next class; it is known as the exclusive method of classification.

The following data are classified on this basis. 54 Expenditure (Rs. ) 0 – 5000 5000-10000 10000-15000 15000-20000 20000-25000 Total No. of families 60 95 122 83 40 400 It is clear that the exclusive method ensures continuity of data as much as the upper limit of one class is the lower limit of the next class. In the above example, there are so families whose expenditure is between Rs. 0 and Rs. 4999. 99. A family whose expenditure is Rs. 5000 would be included in the class interval 5000-10000.

This method is widely used in practice. b) Inclusive method: In this method, the overlapping of the class intervals is avoided. Both the lower and upper limits are included in the class interval. This type of classification may be used for a grouped frequency distribution for discrete variable like members in a family, number of workers in a factory etc. , where the variable may take only integral values. It cannot be used with fractional values like age, height, weight etc.

This method may be illustrated as follows: Class interval Frequency 5- 9 7 10-14 12 15-19 15 20-29 21 30-34 10 35-39 5 Total 70 Thus to decide whether to use the inclusive method or the exclusive method, it is important to determine whether the variable 55 under observation in a continuous or discrete one. In case of continuous variables, the exclusive method must be used. The inclusive method should be used in case of discrete variable. c) Open end classes: A class limit is missing either at the lower end of the first class interval or at the upper end of the last class interval or both are not specified.

The necessity of open end classes arises in a number of practical situations, particularly relating to economic and medical data when there are few very high values or few very low values which are far apart from the majority of observations. The example for the open-end classes as follows : Salary Range No of workers Below 2000 7 2000 – 4000 5 4000 – 6000 6 6000 – 8000 4 8000 and 3 above Construction of frequency table: Constructing a frequency distribution depends on the nature of the given data. Hence, the following general consideration may be borne in mind for ensuring meaningful classification of data. . The number of classes should preferably be between 5 and 20. However there is no rigidity about it. 2. As far as possible one should avoid values of class intervals as 3,7,11,26… . etc. preferably one should have classintervals of either five or multiples of 5 like 10,20,25,100 etc. 3. The starting point i. e the lower limit of the first class, should either be zero or 5 or multiple of 5. 4. To ensure continuity and to get correct class interval we should adopt “exclusive” method. 5. Wherever possible, it is desirable to use class interval of equal sizes. 6 4. 5 Preparation of frequency table: The premise of data in the form of frequency distribution describes the basic pattern which the data assumes in the mass. Frequency distribution gives a better picture of the pattern of data if the number of items is large. If the identity of the individuals about whom a particular information is taken, is not relevant then the first step of condensation is to divide the observed range of variable into a suitable number of class-intervals and to record the number of observations in each class.

Let us consider the weights in kg of 50 college students. 42 62 46 54 41 37 54 44 32 45 47 50 58 49 51 42 46 37 42 39 54 39 51 58 47 64 43 48 49 48 49 61 41 40 58 49 59 57 57 34 56 38 45 52 46 40 63 41 51 41 Here the size of the class interval as per sturges rule is obtained as follows Range Size of class interval = C = 1+3. 322 logN 64 – 32 32 = = 5 1+3. 322 log(50) 6. 64 Thus the number of class interval is 7 and size of each class is 5. The required size of each class is 5. The required frequency distribution is repared using tally marks as given below: Class Interval Tally marks Frequency 30-35 2 35-40 6 40-45 12 45-50 14 50-55 6 55-60 6 60-65 4 Total 50 57 4. 6 Example 2: Given below are the number of tools produced by workers in a factory. 43 40 34 33 28 31 32 23 21 22 18 25 18 39 44 19 20 20 26 45 38 25 13 14 27 41 42 17 31 32 27 33 37 25 26 32 25 34 35 46 29 34 31 34 35 24 30 41 32 29 28 30 31 30 34 35 36 29 26 32 36 35 36 37 23 22 29 33 37 33 27 24 36 42 29 37 29 23 44 41 45 39 21 42 22 28 22 15 16 17 28 29 35 31 27 40 23 32 40 37 Construct frequency distribution with inclusive type of class interval.

Also find. 1. How many workers produced more than 38 tools? 2. How many workers produced less than 23 tools? Solution: Using sturges formula for determining the number of class intervals, we have Number of class intervals = 1+ 3. 322 log10N = 1+ 3. 322 log10100 = 7. 6 Sizes of class interval = Range Number of class interval 46 – 13 7. 6 5 Hence taking the magnitude of class intervals as 5, we have 7 classes 13-17, 18-22… 43-47 are the classes by inclusive type. Using tally marks, the required frequency distribution is obtain in the following table = 58

Class Interval 13-17 18-22 23-27 28-32 33-37 38-42 43-47 Total Tally Marks Number of tools produced (Frequency) 6 11 18 25 22 11 7 100 4. 7 Percentage frequency table: The comparison becomes difficult and at times impossible when the total number of items are large and highly different one distribution to other. Under these circumstances percentage frequency distribution facilitates easy comparability. In percentage frequency table, we have to convert the actual frequencies into percentages. The percentages re calculated by using the formula given below: Actual Frequency Frequency percentage = ? 100 Total Frequency It is also called relative frequency table: An example is given below to construct a percentage frequency table. Marks 0-10 10-20 20-30 30-40 40-50 50-60 Total No. of students 3 8 12 17 6 4 50 59 Frequency percentage 6 16 24 34 12 8 100 Cumulative frequency table: Cumulative frequency distribution has a running total of the values. It is constructed by adding the frequency of the first class interval to the frequency of the second class interval.

Again add that total to the frequency in the third class interval continuing until the final total appearing opposite to the last class interval will be the total of all frequencies. The cumulative frequency may be downward or upward. A downward cumulation results in a list presenting the number of frequencies “less than” any given amount as revealed by the lower limit of succeeding class interval and the upward cumulative results in a list presenting the number of frequencies “more than” and given amount is revealed by the upper limit of a preceding class interval.

Example 3: Age group (in years) 15-20 20-25 25-30 30-35 35-40 40-45 Number of women Less than Cumulative frequency 3 10 25 46 58 64 More than cumulative frequency 64 61 54 39 18 6 4. 8 3 7 15 21 12 6 (a) Less than cumulative frequency distribution table End values upper less than Cumulative limit frequency Less than 20 3 Less than 25 10 Less than 30 25 Less than 35 46 Less than 40 58 Less than 45 64 60 (b) More than cumulative frequency distribution table End values lower limit 15 and above 20 and above 25 and above 30 and above 35 and above 40 and above Cumulative frequency more than 64 61 54 39 18 6 . 8. 1 Conversion of cumulative frequency to simple Frequency: If we have only cumulative frequency ‘ either less than or more than’ , we can convert it into simple frequencies. For example if we have ‘ less than Cumulative frequency, we can convert this to simple frequency by the method given below: Class interval ‘ less than’ Simple frequency Cumulative frequency 15-20 3 3 20-25 10 10 ? 3 = 7 25-30 25 25 ? 10 = 15 30-35 46 46 ? 25 = 21 35-40 58 58 ? 46 = 12 40-45 64 64 ? 58 = 6 Method of converting ‘ more than’ cumulative frequency to simple frequency is given below.

Class interval ‘ more than’ Simple frequency Cumulative frequency 15-20 64 64 ? 61 = 3 20-25 61 61 ? 54 = 7 25-30 54 54 ? 39 = 15 30-35 39 39 ? 18 = 21 35-40 18 18 ? 6 = 12 40-45 6 6? 0 = 6 61 4. 9 Cumulative percentage Frequency table: Instead of cumulative frequency, if cumulative percentages are given, the distribution is called cumulative percentage frequency distribution. We can form this table either by converting the frequencies into percentages and then cumulate it or we can convert the given cumulative frequency into percentages.

Example 4: Income (in Rs ) No. of Cumulative Cumulative family frequency percentage 2000-4000 8 8 5. 7 4000-6000 15 23 16. 4 6000-8000 27 50 35. 7 8000-10000 44 94 67. 1 10000-12000 31 125 89. 3 12000-14000 12 137 97. 9 14000-20000 3 140 100. 0 Total 140 Bivariate frequency distribution: In the previous sections, we described frequency distribution involving one variable only. Such frequency distributions are called univariate frequency distribution. In many situations simultaneous study of two variables become necessary.

For example, we want to classify data relating to the weights are height of a group of individuals, income and expenditure of a group of individuals, age of husbands and wives. The data so classified on the basis of two variables give rise to the so called bivariate frequency distribution and it can be summarized in the form of a table is called bivariate (two-way) frequency table. While preparing a bivariate frequency distribution, the values of each variable are grouped into various classes (not necessarily the same for each variable) .

If the data corresponding to one variable, say X is grouped into m classes and the data corresponding to the other variable, say Y is grouped into n classes then the bivariate table will consist of mxn cells. By going through the different pairs of the values, (X,Y) of the variables and using tally marks we can find the frequency of each 62 4. 10 cell and thus, obtain the bivariate frequency table. The formate of a bivariate frequency table is given below: Format of Bivariate Frequency table Marginal Frequency of Y x-series y-series Class-Intervals Mid-values

Class-intervals MidValues fy Marginal frequency of X fx Total fx= fy=N Here f(x,y) is the frequency of the pair (x,y). The frequency distribution of the values of the variables x together with their frequency total (fx) is called the marginal distribution of x and the frequency distribution of the values of the variable Y together with the total frequencies is known as the marginal frequency distribution of Y. The total of the values of manual frequencies is called grand total (N) Example 5: The data given below relate to the height and weight of 20 persons.

Construct a bivariate frequency table with class interval of height as 62-64, 64-66… and weight as 115-125,125-135, write down the marginal distribution of X and Y. 63 S. No. Height Weight S. No. Height Weight 1 70 170 11 70 163 2 65 135 12 67 139 3 65 136 13 63 122 4 64 137 14 68 134 5 69 148 15 67 140 6 63 121 16 69 132 7 65 117 17 65 120 8 70 128 18 68 148 9 71 143 19 67 129 10 62 129 20 67 152 Solution: Bivariate frequency table showing height and weight of persons. 6 6 6 6 7 T Height(x) 62-64 64-66 66-68 68-70 70-72 Total Weight(y) 4 115-125 II (2) II (2) 5 125-135 I (1) I (1) II (2) I (1) 135-145 III (3)

II (2) I (1) 6 145-155 I (1) II (2) 3 155-165 I (1) 1 165-175 I (1) 1 Total 3 5 4 4 4 20 The marginal distribution of height and weight are given in the following table. Marginal distribution of Marginal distribution height (X) of (Y) CI Frequency CI Frequency 62-64 3 115-125 4 64-66 5 125-135 5 66-68 4 135-145 6 68-70 4 145-155 3 70-72 4 155-165 1 Total 20 165-175 1 Total 20 64 Exercise – 4 I. Choose the best answer: 1. In an exclusive class interval (a) the upper class limit is exclusive. (b) the lower class limit is exclusive. (c) the lower and upper class limits are exclusive. (d) none of the above. . If the lower and upper limits of a class are 10 and 40 respectively, the mid points of the class is (a) 15. 0 (b) 12. 5 (c) 25. 0 (d) 30. 0 3. Class intervals of the type 30-39,40-49,50-59 represents (a) inclusive type (b) exclusive type (c) open-end type (d) none. 4. The class interval of the continuous grouped data is 10-19 20-29 30-39 40-49 50-59 (a) 9 (b)10 (c) 14. 5 (d) 4. 5 5. Raw data means (a) primary data (b) secondary data (c) data collected for investigation (d)Well classified data. II. Fill in the blanks: 6. H. A. Sturges formula for finding number of classes is ________. 7.

If the mid-value of a class interval is 20 and the difference between two consecutive midvalues is 10 the class limits are ________ and ________. 8. The difference between the upper and lower limit of class is called ______. 9. The average of the upper and lower limits of a class is known as _________. 10. Number of observations falling within a particular class interval is called __________ of that class. III. Answer the following questions: 11. What is a frequency distribution? 12. What is an array? 13. What is discrete and continuous frequency distribution? 65 14. Distinguish between with suitable example. i) Continuous and discrete frequency (ii) Exclusive and Inclusive class interval (iii) Less than and more than frequency table (iv) Simple and Bivariate frequency table. 15. The following data gives the number of children in 50 families. Construct a discrete frequency table. 4 2 0 2 3 2 2 1 0 3 5 1 1 4 2 1 3 4 6 1 2 2 2 1 3 4 1 1 3 4 1 0 1 2 2 2 2 4 3 0 1 3 6 1 0 16. In a survey, it was found that 64 families bought milk in the following quantities in a particular month. Quantity of milk (in litres) bought by 64 Families in a month. Construct a continuous frequency distribution making classes of 5-9, 10-14 and so on. 9 14 20 10 25 13 8 16 16 23 25 7 34 36 15 23 22 6 28 18 22 11 22 12 9 24 18 28 5 26 21 9 22 16 10 24 33 11 32 15 12 18 24 20 23 37 21 27 39 7 20 14 26 30 31 17 19 17 21 23 29 13 17 21 2 2 0 5 1 17. 25 values of two variables X and Y are given below. Form a two-way frequency table showing the relationship between the two. Take class interval of X as 10-20,20-30,… and Y as 100.. 200,200-300,… .. 66 X Y X Y X Y 12 140 36 315 57 416 24 256 27 440 44 380 33 360 57 390 48 492 22 470 21 590 48 370 44 470 51 250 52 312 37 380 27 550 41 330 29 280 42 360 69 590 55 420 43 570 48 390 52 290 18.

The ages of 20 husbands and wives are given below. Form a two-way frequency table on the basis of ages of husbands and wives with the class intervals 20-25,25-30 etc. Age of husband 28 37 42 25 29 47 37 35 23 41 Age of wife 23 30 40 26 25 41 35 25 21 38 Age of husband 27 39 23 33 36 32 22 29 38 48 Age of wife 24 34 20 31 29 35 23 29 34 47 IV . Suggested Activities: From the mark sheets of your class, form the frequency tables, less than and more than cumulative frequency tables. Answers I. 1. (a) 2. (c) 3. (a) 4. (b) 5. (a) II. 6. k = 1 + 3. 322 log10N 7. 15 and 25 8. width or size of class 9.

Mid-value 10. Frequency 67 5. DIAGRAMATIC AND GRAPHICAL REPRESENTATION 5. 1 Introduction: In the previous chapter, we have discussed the techniques of classification and tabulation that help in summarising the collected data and presenting them in a systematic manner. However, these forms of presentation do not always prove to be interesting to the common man. One of the most convincing and appealing ways in which statistical results may be presented is through diagrams and graphs. Just one diagram is enough to represent a given data more effectively than thousand words.

Moreover even a layman who has nothing to do with numbers can also understands diagrams. Evidence of this can be found in newspapers, magazines, journals, advertisement, etc. An attempt is made in this chapter to illustrate some of the major types of diagrams and graphs frequently used in presenting statistical data. 5. 2 Diagrams: A diagram is a visual form for presentation of statistical data, highlighting their basic facts and relationship. If we draw diagrams on the basis of the data collected they will easily be understood and appreciated by all.

It is readily intelligible and save a considerable amount of time and energy. 5. 3 Significance of Diagrams and Graphs: Diagrams and graphs are extremely useful because of the following reasons. 1. They are attractive and impressive. 2. They make data simple and intelligible. 3. They make comparison possible 4. They save time and labour. 5. They have universal utility. 6. They give more information. 7. They have a great memorizing effect. 68 5. 4 General rules for constructing diagrams: The construction of diagrams is an art, which can be acquired through practice.

However, observance of some general guidelines can help in making them more attractive and effective. The diagrammatic presentation of statistical facts will be advantageous provided the following rules are observed in drawing diagrams. 1. A diagram should be neatly drawn and attractive. 2. The measurements of geometrical figures used in diagram should be accurate and proportional. 3. The size of the diagrams should match the size of the paper. 4. Every diagram must have a suitable but short heading. 5. The scale should be mentioned in the diagram. 6.

Diagrams should be neatly as well as accurately drawn with the help of drawing instruments. 7. Index must be given for identification so that the reader can easily make out the meaning of the diagram. 8. Footnote must be given at the bottom of the diagram. 9. Economy in cost and energy should be exercised in drawing diagram. Types of diagrams: In practice, a very large variety of diagrams are in use and new ones are constantly being added. For the sake of convenience and simplicity, they may be divided under the following heads: 1. One-dimensional diagrams 2.

Two-dimensional diagrams 3. Three-dimensional diagrams 4. Pictograms and Cartograms 5. 5. 1 One-dimensional diagrams: In such diagrams, only one-dimensional measurement, i. e height is used and the width is not considered. These diagrams are in the form of bar or line charts and can be classified as 1. Line Diagram 2. Simple Diagram 3. Multiple Bar Diagram 4. Sub-divided Bar Diagram 5. Percentage Bar Diagram 69 5. 5 Line Diagram: Line diagram is used in case where there are many items to be shown and there is not much of difference in their values.

Such diagram is prepared by drawing a vertical line for each item according to the scale. The distance between lines is kept uniform. Line diagram makes comparison easy, but it is less attractive. Example 1: Show the following data by a line chart: No. of children 0 1 2 3 4 5 Frequency 10 14 9 6 4 2 Line Diagram 16 14 12 10 8 6 4 2 0 0 1 2 3 4 5 6 Frequency No. of Children Simple Bar Diagram: Simple bar diagram can be drawn either on horizontal or vertical base, but bars on horizontal base more common. Bars must be uniform width and intervening space between bars must be equal.

While constructing a simple bar diagram, the scale is determined on the basis of the highest value in the series. To make the diagram attractive, the bars can be coloured. Bar diagram are used in business and economics. However, an important limitation of such diagrams is that they can present only one classification or one category of data. For example, while presenting the population for the last five decades, one can only depict the total population in the simple bar diagrams, and not its sex-wise distribution. 70 Example 2: Represent the following data by a bar diagram.

Year 1991 1992 1993 1994 1995 Solution: Production (in tones) 45 40 42 55 50 Simple Bar Diagram 60 50 Production (in tonnes) 40 30 20 10 0 1991 1992 1993 Year 1994 1995 Multiple Bar Diagram: Multiple bar diagram is used for comparing two or more sets of statistical data. Bars are constructed side by side to represent the set of values for comparison. In order to distinguish bars, they may be either differently coloured or there should be different types of crossings or dotting, etc. An index is also prepared to identify the meaning of different colours or dottings. 1 Example 3: Draw a multiple bar diagram for the following data. Profit before tax Profit after tax Year ( in lakhs of rupees ) ( in lakhs of rupees ) 1998 195 80 1999 200 87 2000 165 45 2001 140 32 Solution: Multiple Bar Diagram 200 180 160 140 120 100 80 60 40 20 0 1998 1999 2000 Year 2001 Profit (in Rs) Profit before tax Profit after tax Sub-divided Bar Diagram: In a sub-divided bar diagram, the bar is sub-divided into various parts in proportion to the values given in the data and the whole bar represent the total.

Such diagrams are also called Component Bar diagrams. The sub divisions are distinguished by different colours or crossings or dottings. The main defect of such a diagram is that all the parts do not have a common base to enable one to compare accurately the various components of the data. Example 4: Represent the following data by a sub-divided bar diagram. 72 Expenditure items Food Clothing Education Housing Rent Miscellaneous Solution: Monthly expenditure (in Rs. ) Family A Family B 75 95 20 25 15 10 40 65 25 35 Sub-divided Bar Diagram 240

### Cite this Statistics Importance

Statistics Importance. (2016, Sep 27). Retrieved from https://graduateway.com/statistics-importance/

This is just a sample.

You can get your custom paper from
our expert writers