Materials science Essay Examples Page 2

Stress Analysis of the Front Suspension of a Formula Student Racing Car Using Solidworks Simulation Tools Abstract— the paper covers a simulation of the front suspension system which obtained a better way to analyze the problem. With the help of theoretical study, the simulation was conducted by using composite elements mesh for the system, which…

According to B. Mallick at el conducted an experimental investigation for machining by micro-ECDM, each variable was coded and the upper level was taken as +1 and the lower level as – 1 of every process parameter in order to design the experiments in an optimized way. Flat end cylindrical stainless tool of diameter 250µm…

The engine is the single most important part of the automobile. Without it, the car simply will not move. It is important that the cylinder or engine block is built to withstand the high temperatures and pressures that are put into it and it is equally important that the engine block is built to last….

This article provides a thorough introduction to smart materials, encompassing their definition and various types. It discusses several examples of smart materials like piezoelectric materials, magneto-rheostatic materials, electro-rheostatic materials, and shape memory alloys. Additionally, it emphasizes the wide range of smart material options available and ongoing research aimed at creating new ones. The article also…

Objective: Separate and purify acetanilide from a mixture by recrystallization. Compare the melting points of crude and recrystallized acetanilide. Introduction : The most common method of purifying solid organic compounds is by recrystallization. In this technique, an impure solid compound is dissolved in a solvent and then allowed to slowly crystallize out as the solution…

The aim of this investigation was to find the stress intensity that was present when a finite analysis of a cracked plate was conducted. The results that were gained from using the software, ANSYS, were verified with theoretical hand calculations. The stress intensity (KI) was found to be 0.42 Pam1/2 using the finite element analysis…

Introduction The purpose of this lab is to create two material samples through the process of powder metallurgy. After these samples have been manufactured completely through this process then they are evaluated under a microscope. One sample was sintered, and the other one was in its original compacted state for a comparison of how sintering…