Electric Iron Mechanism

Read Summary
Summary

An electric iron is a handheld piece of equipment with a flat, roughly triangular metal surface that is used to press clothes to remove creases. The iron works by loosening the ties between the long chains of molecules that exist in polymer fiber materials. The design of an electric iron consists of a heating coil, thermostat, electrical cord, temperature control dial, sole plate, and handle. The heating coil is made of metal, and when electricity flows through it, it gets hot and transfers the heat to the sole plate. The thermostat gradually disconnects the supply when the heating coil gets too hot. The sole plate is a flat triangular surface cast of aluminum coated with a non-stick PTFE or stainless steel. The electric iron is an application of conversion of electric energy into heat energy to be used in removing creases from clothes by stretching the fibers. It is now one of the essential appliances at homes.

Table of Content

Mechanism description of Electric Iron introduction: An electric iron is a small appliance,a handheld piece of equipment with a flat, roughly triangular metal surface that, when heated, is used to press clothes to remove creases. Ironing works by loosening the ties between the long chains of molecules that exist in polymer fiber materials. With the heat and the weight of the ironing plate, the fibers are stretched and the fabric maintains its new shape when cool. description:

The electric iron must have a design and an electric iron basically consist of basically a heating coil and thermostat. It also has electrical cord, temperature control dial and a sole plate. ·The design should allow the iron to be set down, usually standing on its end, without the hot soleplate touching anything that could be damaged. ·Thermostat : When we switch on the electric iron current flows throught the heating coil. The heat in the heating coil causes expansion in the thermostat which gradually disconnects the supply. Heating Coil : a coil made of metal so when electricity flows through it, it gets hot and it transferes this heat to the sole plate. ·Sole plate : it’s a a flat triangular surface cast of aluminium coated with a non-stick PTFE or stainless steel. It’s heated and press clothes to remove creases. ·Electrical cord: It has heat-resistant and the point at which the cord attaches to the iron has a spring to hold the cord out of the way while ironing and likewise when setting down the iron. Temperature control dial : allows the user to select the operating temperatures. ·Handel: to be gripped from. usaually from plastic. Conclusion: The electric iron is an application of conversion of electric energy into heat energy to be used in removing creases from clothes by streching the fibers. And it consists of many parts but the most impotant are the heating coil, the thermostat and the sole plate. Electric iron is now one of the essential appliances at homes.

Cite this page

Electric Iron Mechanism. (2016, Dec 12). Retrieved from

https://graduateway.com/electric-iron-mechanism/

Remember! This essay was written by a student

You can get a custom paper by one of our expert writers

Order custom paper Without paying upfront